【软管泵-滑模机重信誉厂家】

生产工艺：本公司系列软管具有使用寿命长、适用范围广等特点，它结构是经过一层或多层高强度合成纤维编织层，增强了耐磨性、抗撕裂性软管的内衬和外衬均挤压成型，内衬采用一系列的复合橡胶。管体柔软，富有高强弹性，具有极优越的耐磨性能。采用新型原材料，增强管体的整体性能。在使用过程中生热低，弹性复原性好，经久耐用。胶管具有良好的耐正压和负压，具有良好的耐酸、碱、油、高温等特点，可以输送当今90%以上的化学品。主要成份有天然橡胶（耐一般的弱酸及酒精）、丁基橡胶（耐油脂、碱金属和清洁剂等）和三元乙丙橡胶（适用于酮、酒精及浓酸）等。软管的使用温度≤100℃，考虑生产过程中会产生热量，一般用于介质温度<80℃的工况。若在通风（或冷却）散热条件较好的情况下，介质温度可以到100℃。若物料温度≥120℃，需选用特殊耐热软管。输送有卫生级介质（如食品、医药等），可采用特制的卫生级软管。另可根据用户需要进行非标设计。     

软管泵是由泵壳、转子体、机座、软管、减速电机以及电控系统等部分组成。转子体旋转，转子体上的一对压辊沿着一根特制的胶管旋转，压辊与泵壳产生的挤压力将胶管压扁，在管子自身弹性和侧导辊的作用下，通过恢复原状产生的真空吸入物料，物料从管内排出，这样往复循环。 

The hose pump is composed of pump casing, rotor body, frame, hose, reduction motor and electronic control system. The rotor body rotates, and a pair of pressure rollers on the rotor body rotates along a special rubber hose. The squeezing force generated by the pressure roller and the pump casing will flatten the rubber hose. The elasticity of the tube and the side guide rollers restore the The vacuum produced by the original state sucks the material, and the material is discharged from the tube, so as to reciprocate.

 

首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.